SistVentasLSR/nbproject/remote-platform-impl.xml

<?xml version="1.0" encoding="UTF-8"?>
<!--

    Licensed to the Apache Software Foundation (ASF) under one
    or more contributor license agreements.  See the NOTICE file
    distributed with this work for additional information
    regarding copyright ownership.  The ASF licenses this file
    to you under the Apache License, Version 2.0 (the
    "License"); you may not use this file except in compliance
    with the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing,
    software distributed under the License is distributed on an
    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    KIND, either express or implied.  See the License for the
    specific language governing permissions and limitations
    under the License.

-->

<project default="default" basedir=".." xmlns:remote="http://www.netbeans.org/ns/j2se-project/remote-platform/1" xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3">

    <target name="default">
        <echo message="Default target is not set, you must specify which target you want to run."/>
    </target>

    <target name="-init-remote-platform-properties" depends="init">
        <fail unless="platform.runtime">Runtime platform (platform.runtime) must be set.</fail>
        <j2seproject1:property name="remote.platform.home.dir" value="platforms.${platform.runtime}.platform.install.folder"/>
        <j2seproject1:property name="remote.platform.work.dir" value="platforms.${platform.runtime}.platform.work.folder"/>
        <j2seproject1:property name="remote.platform.host" value="platforms.${platform.runtime}.platform.host"/>
        <j2seproject1:property name="remote.platform.port" value="platforms.${platform.runtime}.platform.port"/>
        <j2seproject1:property name="remote.platform.user" value="platforms.${platform.runtime}.platform.auth.username"/>
        <j2seproject1:property name="remote.platform.auth" value="platforms.${platform.runtime}.platform.auth.kind"/>
        <j2seproject1:property name="remote.platform.keyfile" value="platforms.${platform.runtime}.platform.auth.keystore"/>
        <j2seproject1:property name="remote.platform.exec.decorator" value="platforms.${platform.runtime}.platform.exec.decorator"/>
        <fail unless="remote.platform.home.dir">Must set remote.platform.home.dir</fail>
        <fail unless="remote.platform.work.dir">Must set remote.platform.work.dir</fail>
        <fail unless="remote.platform.host">Must set remote.platform.host</fail>
        <fail unless="remote.platform.port">Must set remote.platform.port</fail>
        <fail unless="remote.platform.user">Must set remote.platform.user</fail>
        <fail unless="remote.platform.auth">Must set remote.platform.auth</fail>
        <condition property="remote.platform.auth.passwd">
            <equals arg1="${remote.platform.auth}" arg2="PASSWORD"/>
        </condition>
        <condition property="remote.platform.auth.key">
            <equals arg1="${remote.platform.auth}" arg2="KEY"/>
        </condition>
        <basename file="${basedir}" property="remote.project.name"/>
        <basename file="${dist.dir}" property="remote.dist.dir.name"/>
        <basename file="${dist.jar}" property="remote.dist.jar.name"/>
        <property name="remote.project.dir" value="${remote.platform.work.dir}/${remote.project.name}"/>
        <property name="remote.dist.dir" value="${remote.project.dir}/${remote.dist.dir.name}"/>
        <property name="remote.dist.jar" value="${remote.dist.dir}/${remote.dist.jar.name}"/>
        <property name="remote.java.executable" value="${remote.platform.home.dir}/bin/java"/>
        <scriptdef name="addressport" language="javascript">
            <attribute name="address" />
            <attribute name="property" />
         <![CDATA[
           var address = attributes.get("address");
           project.setProperty(attributes.get("property"), address.split(":")[1]);
         ]]>
      </scriptdef>
      <condition property="remote.platform.exec.prefix" value="'${remote.platform.exec.decorator}' " else="">
        <not>
            <equals arg1="${remote.platform.exec.decorator}" arg2="$${platforms.${platform.runtime}.platform.exec.decorator}"/>
        </not>
      </condition>
    </target>
    
    <target name="-copy-to-remote-platform">
      <macrodef name="runwithpasswd" uri="http://www.netbeans.org/ns/j2se-project/remote-platform/1">
            <attribute name="additionaljvmargs" default=""/>
            <sequential>
                <sshexec host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" password="${remote.platform.password}" trust="true" command="mkdir -p '${remote.dist.dir}'"/>
                <scp todir="${remote.platform.user}@${remote.platform.host}:${remote.dist.dir}" port="${remote.platform.port}" password="${remote.platform.password}" trust="true">
                    <fileset dir="${dist.dir}"/>
                </scp>
                <antcall target="profile-rp-calibrate-passwd"/>
                <sshexec host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" password="${remote.platform.password}" trust="true" usepty="true"
                    command="cd '${remote.project.dir}'; ${remote.platform.exec.prefix}'${remote.java.executable}' @{additionaljvmargs} -Dfile.encoding=${runtime.encoding} ${run.jvmargs} ${run.jvmargs.ide} -jar ${remote.dist.jar} ${application.args}"/>
            </sequential>
        </macrodef>
        <macrodef name="runwithkey" uri="http://www.netbeans.org/ns/j2se-project/remote-platform/1">
            <attribute name="additionaljvmargs" default=""/>
            <sequential>
                <fail unless="remote.platform.keyfile">Must set remote.platform.keyfile</fail>
                <sshexec host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" keyfile="${remote.platform.keyfile}" passphrase="${remote.platform.passphrase}" trust="true" command="mkdir -p '${remote.dist.dir}'"/>
                <scp todir="${remote.platform.user}@${remote.platform.host}:${remote.dist.dir}" port="${remote.platform.port}" keyfile="${remote.platform.keyfile}" passphrase="${remote.platform.passphrase}" trust="true">
                    <fileset dir="${dist.dir}"/>
                </scp>
                <antcall target="profile-rp-calibrate-key"/>
                <sshexec host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" keyfile="${remote.platform.keyfile}" passphrase="${remote.platform.passphrase}" trust="true" usepty="true"
                    command="cd '${remote.project.dir}'; ${remote.platform.exec.prefix}'${remote.java.executable}' @{additionaljvmargs} -Dfile.encoding=${runtime.encoding} ${run.jvmargs} ${run.jvmargs.ide} -jar ${remote.dist.jar} ${application.args}"/>
            </sequential>
        </macrodef>
    </target>

    <target name="-check-vm-debug" depends="init, -init-remote-platform-properties, -copy-to-remote-platform">
        <j2seproject1:property name="remote.platform.jvm.debug" value="platforms.${platform.runtime}.platform.jvm.debug"/>
        <condition property="remote.platform.jvm.debug.available" value="true">
            <or>
                <contains string="${remote.platform.jvm.debug}" substring="$${platforms."/>
                <istrue value="${remote.platform.jvm.debug}"/>
            </or>
        </condition>
        <fail unless="remote.platform.jvm.debug.available" message="The Runtime JVM ${remote.platform.host}:${remote.platform.home.dir} does not support debugging."/>
    </target>

    <target name="-ask-password" unless="remote.platform.password" if="remote.platform.auth.passwd">
        <input message="Password ${remote.platform.user}@${remote.platform.host}:" addproperty="remote.platform.password">
            <handler type="secure"/>
        </input>
    </target>

    <target name="-ask-passphrase" unless="remote.platform.passphrase" if="remote.platform.auth.key">
        <input message="Passphrase ${remote.platform.user}@${remote.platform.host}:" addproperty="remote.platform.passphrase">
            <handler type="secure"/>
        </input>
    </target>

    <target name="-run-remote-passwd" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -ask-password" if="remote.platform.auth.passwd">
        <remote:runwithpasswd/>
    </target>

    <target name="-debug-remote-passwd" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -ask-password, -debug-start-debugger" if="remote.platform.auth.passwd">
        <addressport address="${jpda.address}" property="jpda.port"/>
        <sshsession host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" password="${remote.platform.password}" trust="true">
            <remotetunnel lport="${jpda.port}" lhost="localhost" rport="${jpda.port}"/>
            <sequential>
                <remote:runwithpasswd additionaljvmargs="${debug-args-line} -Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/>
            </sequential>
        </sshsession>
    </target>

    <target name="-run-remote-key" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -ask-passphrase" if="remote.platform.auth.key">
        <remote:runwithkey/>
    </target>

    <target name="-debug-remote-key" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -ask-passphrase, -debug-start-debugger" if="remote.platform.auth.key">
        <addressport address="${jpda.address}" property="jpda.port"/>
        <sshsession host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" keyfile="${remote.platform.keyfile}" passphrase="${remote.platform.passphrase}" trust="true">
            <remotetunnel lport="${jpda.port}" lhost="localhost" rport="${jpda.port}"/>
            <sequential>
                <remote:runwithkey additionaljvmargs="${debug-args-line} -Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/>
            </sequential>
        </sshsession>
    </target>
    
    <target name="profile-clean-rp" depends="profile-rp-renew-local-calibration" if="profiling.started">
        <delete dir="${dist.dir}/remotepack"/>
        <delete file="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new"/>
    </target>
    
    <target name="profile-rp-renew-local-check">
        <condition property="profiler.calibration.local-remote.replace">
            <and>
                <available file="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new" type="file"/>
                <not>
                    <filesmatch 
                        file1="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}" 
                        file2="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new"/>
                </not>
            </and>
        </condition>
    </target>
    
    <target name="profile-rp-renew-local-calibration" depends="profile-rp-renew-local-check" if="profiler.calibration.local-remote.replace">
         <move 
             file="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new" 
             tofile="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}"
             force="true"
             verbose="true"/>
    </target>
    
    <target name="profile-rp-unzip" if="profiling.started" depends="profile-rp-create">        
        <unzip src="${java.io.tmpdir}/profiler-server-${remote.platform.rp.filename}.zip" dest="${dist.dir}/remotepack"/>
        <chmod perm="a+x">
            <fileset dir="${dist.dir}/remotepack">
                <include name="**/*.so"/>
                <include name="**/*.dll"/>
                <include name="**/*.sh"/>
                <include name="**/*.jnilib"/>
                <exclude name="**/*.jar"/>
            </fileset>
        </chmod>
        
    </target>
    
    <target name="profile-rp-create" if="profiling.started">
        <property name="profile.cluster" value="${netbeans.home}/../profiler"/>
        <ant dir="${profile.cluster}/remote-pack-defs" target="profiler-server-${remote.platform.rp.target}" inheritall="false">
           <property name="cluster" location="${profile.cluster}"/>
           <property name="dest.dir" location="${java.io.tmpdir}"/>
       </ant>
    </target>
        
    <target name="profile-toggle">
        <property name="profiling.started" value="true"/>
    </target>
    
    <target name="profile-rp-calibrate-passwd" if="profiling.started">
        <sshexec host="${remote.platform.host}" port="${remote.platform.port}" 
                 username="${remote.platform.user}" password="${remote.platform.password}" 
                 trust="true" usepty="true" 
                 command="export JAVA_HOME=${remote.platform.home.dir}; [ -f ~/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver} ] &amp;&amp; echo &quot;Calibration data exists: skipping calibration&quot; || /bin/sh ${remote.dist.dir}/remotepack/bin/calibrate.sh"/>
        <scp file="${remote.platform.user}:${remote.platform.password}@${remote.platform.host}:~/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}"
            localTofile="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new" trust="true"/>
        <antcall target="profile-clean-rp"/>
    </target>
    
    <target name="profile-rp-calibrate-key" if="profiling.started">
        <fail unless="remote.platform.keyfile">Must set remote.platform.keyfile</fail>
        <sshexec host="${remote.platform.host}" port="${remote.platform.port}" 
                 username="${remote.platform.user}" keyfile="${remote.platform.keyfile}" 
                 passphrase="${remote.platform.passphrase}" trust="true" usepty="true" 
                 command="export JAVA_HOME=${remote.platform.home.dir}; [ -f ~/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver} ] &amp;&amp; echo &quot;Calibration data exists: skipping calibration&quot; || /bin/sh ${remote.dist.dir}/remotepack/bin/calibrate.sh"/>
        <scp file="${remote.platform.user}:${remote.platform.password}@${remote.platform.host}:~/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}"
             localTofile="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new" trust="true"
             keyfile="${remote.platform.keyfile}" passphrase="${remote.platform.passphrase}"/>
        <antcall target="profile-clean-rp"/>
    </target>
    
    <target name="run-remote" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -run-remote-passwd, -run-remote-key"/>
    <target name="debug-remote" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -check-vm-debug, -debug-remote-passwd, -debug-remote-key"/>
    <target name="profile-remote" depends="init, jar, profile-toggle, -init-remote-platform-properties, profile-rp-unzip, -profile-check" if="profiler.configured">
        <startprofiler/>
        <mkdir dir="${user.home}/.nbprofiler"/>
        <antcall target="-run-remote-passwd"/>
        <antcall target="-run-remote-key"/>        
    </target>
</project>