SistVentasLSR/nbproject/remote-platform-impl_backup.xml
2020-08-01 02:28:21 -04:00

254 lines
16 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!--
DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
Copyright (c) 2013, 2016 Oracle and/or its affiliates. All rights reserved.
Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners.
The contents of this file are subject to the terms of either the GNU
General Public License Version 2 only ("GPL") or the Common
Development and Distribution License("CDDL") (collectively, the
"License"). You may not use this file except in compliance with the
License. You can obtain a copy of the License at
http://www.netbeans.org/cddl-gplv2.html
or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the
specific language governing permissions and limitations under the
License. When distributing the software, include this License Header
Notice in each file and include the License file at
nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this
particular file as subject to the "Classpath" exception as provided
by Oracle in the GPL Version 2 section of the License file that
accompanied this code. If applicable, add the following below the
License Header, with the fields enclosed by brackets [] replaced by
your own identifying information:
"Portions Copyrighted [year] [name of copyright owner]"
If you wish your version of this file to be governed by only the CDDL
or only the GPL Version 2, indicate your decision by adding
"[Contributor] elects to include this software in this distribution
under the [CDDL or GPL Version 2] license." If you do not indicate a
single choice of license, a recipient has the option to distribute
your version of this file under either the CDDL, the GPL Version 2 or
to extend the choice of license to its licensees as provided above.
However, if you add GPL Version 2 code and therefore, elected the GPL
Version 2 license, then the option applies only if the new code is
made subject to such option by the copyright holder.
Contributor(s):
-->
<project default="default" basedir=".." xmlns:remote="http://www.netbeans.org/ns/j2se-project/remote-platform/1" xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3">
<target name="default">
<echo message="Default target is not set, you must specify which target you want to run."/>
</target>
<target name="-init-remote-platform-properties" depends="init">
<fail unless="platform.runtime">Runtime platform (platform.runtime) must be set.</fail>
<j2seproject1:property name="remote.platform.home.dir" value="platforms.${platform.runtime}.platform.install.folder"/>
<j2seproject1:property name="remote.platform.work.dir" value="platforms.${platform.runtime}.platform.work.folder"/>
<j2seproject1:property name="remote.platform.host" value="platforms.${platform.runtime}.platform.host"/>
<j2seproject1:property name="remote.platform.port" value="platforms.${platform.runtime}.platform.port"/>
<j2seproject1:property name="remote.platform.user" value="platforms.${platform.runtime}.platform.auth.username"/>
<j2seproject1:property name="remote.platform.auth" value="platforms.${platform.runtime}.platform.auth.kind"/>
<j2seproject1:property name="remote.platform.keyfile" value="platforms.${platform.runtime}.platform.auth.keystore"/>
<j2seproject1:property name="remote.platform.exec.decorator" value="platforms.${platform.runtime}.platform.exec.decorator"/>
<fail unless="remote.platform.home.dir">Must set remote.platform.home.dir</fail>
<fail unless="remote.platform.work.dir">Must set remote.platform.work.dir</fail>
<fail unless="remote.platform.host">Must set remote.platform.host</fail>
<fail unless="remote.platform.port">Must set remote.platform.port</fail>
<fail unless="remote.platform.user">Must set remote.platform.user</fail>
<fail unless="remote.platform.auth">Must set remote.platform.auth</fail>
<condition property="remote.platform.auth.passwd">
<equals arg1="${remote.platform.auth}" arg2="PASSWORD"/>
</condition>
<condition property="remote.platform.auth.key">
<equals arg1="${remote.platform.auth}" arg2="KEY"/>
</condition>
<basename file="${basedir}" property="remote.project.name"/>
<basename file="${dist.dir}" property="remote.dist.dir.name"/>
<basename file="${dist.jar}" property="remote.dist.jar.name"/>
<property name="remote.project.dir" value="${remote.platform.work.dir}/${remote.project.name}"/>
<property name="remote.dist.dir" value="${remote.project.dir}/${remote.dist.dir.name}"/>
<property name="remote.dist.jar" value="${remote.dist.dir}/${remote.dist.jar.name}"/>
<property name="remote.java.executable" value="${remote.platform.home.dir}/bin/java"/>
<scriptdef name="addressport" language="javascript">
<attribute name="address" />
<attribute name="property" />
<![CDATA[
var address = attributes.get("address");
project.setProperty(attributes.get("property"), address.split(":")[1]);
]]>
</scriptdef>
<condition property="remote.platform.exec.prefix" value="'${remote.platform.exec.decorator}' " else="">
<not>
<equals arg1="${remote.platform.exec.decorator}" arg2="$${platforms.${platform.runtime}.platform.exec.decorator}"/>
</not>
</condition>
</target>
<target name="-copy-to-remote-platform">
<macrodef name="runwithpasswd" uri="http://www.netbeans.org/ns/j2se-project/remote-platform/1">
<attribute name="additionaljvmargs" default=""/>
<sequential>
<sshexec host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" password="${remote.platform.password}" trust="true" command="mkdir -p '${remote.dist.dir}'"/>
<scp todir="${remote.platform.user}@${remote.platform.host}:${remote.dist.dir}" port="${remote.platform.port}" password="${remote.platform.password}" trust="true">
<fileset dir="${dist.dir}"/>
</scp>
<antcall target="profile-rp-calibrate-passwd"/>
<sshexec host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" password="${remote.platform.password}" trust="true" usepty="true"
command="cd '${remote.project.dir}'; ${remote.platform.exec.prefix}'${remote.java.executable}' @{additionaljvmargs} -Dfile.encoding=${runtime.encoding} ${run.jvmargs} ${run.jvmargs.ide} -jar ${remote.dist.jar} ${application.args}"/>
</sequential>
</macrodef>
<macrodef name="runwithkey" uri="http://www.netbeans.org/ns/j2se-project/remote-platform/1">
<attribute name="additionaljvmargs" default=""/>
<sequential>
<fail unless="remote.platform.keyfile">Must set remote.platform.keyfile</fail>
<sshexec host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" keyfile="${remote.platform.keyfile}" passphrase="${remote.platform.passphrase}" trust="true" command="mkdir -p '${remote.dist.dir}'"/>
<scp todir="${remote.platform.user}@${remote.platform.host}:${remote.dist.dir}" port="${remote.platform.port}" keyfile="${remote.platform.keyfile}" passphrase="${remote.platform.passphrase}" trust="true">
<fileset dir="${dist.dir}"/>
</scp>
<antcall target="profile-rp-calibrate-key"/>
<sshexec host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" keyfile="${remote.platform.keyfile}" passphrase="${remote.platform.passphrase}" trust="true" usepty="true"
command="cd '${remote.project.dir}'; ${remote.platform.exec.prefix}'${remote.java.executable}' @{additionaljvmargs} -Dfile.encoding=${runtime.encoding} ${run.jvmargs} ${run.jvmargs.ide} -jar ${remote.dist.jar} ${application.args}"/>
</sequential>
</macrodef>
</target>
<target name="-check-vm-debug" depends="init, -init-remote-platform-properties, -copy-to-remote-platform">
<j2seproject1:property name="remote.platform.jvm.debug" value="platforms.${platform.runtime}.platform.jvm.debug"/>
<condition property="remote.platform.jvm.debug.available" value="true">
<or>
<contains string="${remote.platform.jvm.debug}" substring="$${platforms."/>
<istrue value="${remote.platform.jvm.debug}"/>
</or>
</condition>
<fail unless="remote.platform.jvm.debug.available" message="The Runtime JVM ${remote.platform.host}:${remote.platform.home.dir} does not support debugging."/>
</target>
<target name="-ask-password" unless="remote.platform.password" if="remote.platform.auth.passwd">
<input message="Password ${remote.platform.user}@${remote.platform.host}:" addproperty="remote.platform.password">
<handler type="secure"/>
</input>
</target>
<target name="-ask-passphrase" unless="remote.platform.passphrase" if="remote.platform.auth.key">
<input message="Passphrase ${remote.platform.user}@${remote.platform.host}:" addproperty="remote.platform.passphrase">
<handler type="secure"/>
</input>
</target>
<target name="-run-remote-passwd" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -ask-password" if="remote.platform.auth.passwd">
<remote:runwithpasswd/>
</target>
<target name="-debug-remote-passwd" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -ask-password, -debug-start-debugger" if="remote.platform.auth.passwd">
<addressport address="${jpda.address}" property="jpda.port"/>
<sshsession host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" password="${remote.platform.password}" trust="true">
<remotetunnel lport="${jpda.port}" lhost="localhost" rport="${jpda.port}"/>
<sequential>
<remote:runwithpasswd additionaljvmargs="${debug-args-line} -Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/>
</sequential>
</sshsession>
</target>
<target name="-run-remote-key" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -ask-passphrase" if="remote.platform.auth.key">
<remote:runwithkey/>
</target>
<target name="-debug-remote-key" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -ask-passphrase, -debug-start-debugger" if="remote.platform.auth.key">
<addressport address="${jpda.address}" property="jpda.port"/>
<sshsession host="${remote.platform.host}" port="${remote.platform.port}" username="${remote.platform.user}" keyfile="${remote.platform.keyfile}" passphrase="${remote.platform.passphrase}" trust="true">
<remotetunnel lport="${jpda.port}" lhost="localhost" rport="${jpda.port}"/>
<sequential>
<remote:runwithkey additionaljvmargs="${debug-args-line} -Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/>
</sequential>
</sshsession>
</target>
<target name="profile-clean-rp" depends="profile-rp-renew-local-calibration" if="profiling.started">
<delete dir="${dist.dir}/remotepack"/>
<delete file="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new"/>
</target>
<target name="profile-rp-renew-local-check">
<condition property="profiler.calibration.local-remote.replace">
<and>
<available file="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new" type="file"/>
<not>
<filesmatch
file1="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}"
file2="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new"/>
</not>
</and>
</condition>
</target>
<target name="profile-rp-renew-local-calibration" depends="profile-rp-renew-local-check" if="profiler.calibration.local-remote.replace">
<move
file="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new"
tofile="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}"
force="true"
verbose="true"/>
</target>
<target name="profile-rp-unzip" if="profiling.started" depends="profile-rp-create">
<unzip src="${java.io.tmpdir}/profiler-server-${remote.platform.rp.filename}.zip" dest="${dist.dir}/remotepack"/>
<chmod perm="a+x">
<fileset dir="${dist.dir}/remotepack">
<include name="**/*.so"/>
<include name="**/*.dll"/>
<include name="**/*.sh"/>
<include name="**/*.jnilib"/>
<exclude name="**/*.jar"/>
</fileset>
</chmod>
</target>
<target name="profile-rp-create" if="profiling.started">
<property name="profile.cluster" value="${netbeans.home}/../profiler"/>
<ant dir="${profile.cluster}/remote-pack-defs" target="profiler-server-${remote.platform.rp.target}" inheritall="false">
<property name="cluster" location="${profile.cluster}"/>
<property name="dest.dir" location="${java.io.tmpdir}"/>
</ant>
</target>
<target name="profile-toggle">
<property name="profiling.started" value="true"/>
</target>
<target name="profile-rp-calibrate-passwd" if="profiling.started">
<sshexec host="${remote.platform.host}" port="${remote.platform.port}"
username="${remote.platform.user}" password="${remote.platform.password}"
trust="true" usepty="true"
command="export JAVA_HOME=${remote.platform.home.dir}; [ -f ~/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver} ] &amp;&amp; echo &quot;Calibration data exists: skipping calibration&quot; || /bin/sh ${remote.dist.dir}/remotepack/bin/calibrate.sh"/>
<scp file="${remote.platform.user}:${remote.platform.password}@${remote.platform.host}:~/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}"
localTofile="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new" trust="true"/>
<antcall target="profile-clean-rp"/>
</target>
<target name="profile-rp-calibrate-key" if="profiling.started">
<fail unless="remote.platform.keyfile">Must set remote.platform.keyfile</fail>
<sshexec host="${remote.platform.host}" port="${remote.platform.port}"
username="${remote.platform.user}" keyfile="${remote.platform.keyfile}"
passphrase="${remote.platform.passphrase}" trust="true" usepty="true"
command="export JAVA_HOME=${remote.platform.home.dir}; [ -f ~/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver} ] &amp;&amp; echo &quot;Calibration data exists: skipping calibration&quot; || /bin/sh ${remote.dist.dir}/remotepack/bin/calibrate.sh"/>
<scp file="${remote.platform.user}:${remote.platform.password}@${remote.platform.host}:~/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}"
localTofile="${user.home}/.nbprofiler/machinedata.jdk${remote.platform.java.spec.ver}.${remote.platform.host}.new" trust="true"
keyfile="${remote.platform.keyfile}" passphrase="${remote.platform.passphrase}"/>
<antcall target="profile-clean-rp"/>
</target>
<target name="run-remote" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -run-remote-passwd, -run-remote-key"/>
<target name="debug-remote" depends="init, jar, -init-remote-platform-properties, -copy-to-remote-platform, -check-vm-debug, -debug-remote-passwd, -debug-remote-key"/>
<target name="profile-remote" depends="init, jar, profile-toggle, -init-remote-platform-properties, profile-rp-unzip, -profile-check" if="profiler.configured">
<startprofiler/>
<mkdir dir="${user.home}/.nbprofiler"/>
<antcall target="-run-remote-passwd"/>
<antcall target="-run-remote-key"/>
</target>
</project>