# Introduction

The C# programming language is similar to any human written or spoken language.
They each support different ways of expressing the same idea. In spoken
languages, some words and phrases are more descriptive, accurate, or succinct
than others. In the C# programming language, there is more than one way to
create branching logic. For example, selections that use `if` statements and
selections that use `switch` statements. Depending on the context of your
application, one type of selection statement might be more expressive and
succinct than the other.

Suppose working on applications that make extensive use of selections
statements. In some cases, `if-elseif-else` constructs are used to produce
succinct and expressive code that is easy to read and maintain. In other cases,
the `if-elseif-else` constructs produce the required result, but are difficult
to read and maintain. You have been tasked with reviewing the code and
determining when it is suitable to use a `switch` statement rather than an `if`
statement.

In this module, you'll investigate the use of a `switch` statement to implement
branching logic as an alternative to an `if` statement. You'll also work on
converting an `if-elseif-else` construct to a `switch-case` construct. During
this process, you'll learn to recognize the benefits of choosing one type of
selection statement over the other.

By the end of this module, you'll be able to implement `switch` statements in
your application, judge when to use a `switch` statement over an
`if-elseif-else` construct, and convert `if-elseif-else` constructs to `switch`
statements.

### Learning objectives

In this module, you will:

- Use the `switch-case` construct to match a variable or expression against
several possible outcomes.
- Convert code that uses an `if-elseif-else` construct into a `switch-case`
construct.

---

## Exercise

### Implement a switch statement

A `switch` statement is a C# selection statement that provides an alternative
to an `if-elseif-else` branching construct. The `switch` statement provides
advantages over an `if-elseif-else` construct when evaluating a single value
against a list of known matching values.

Consider the following scenario:

- You're working on an application related to food nutrition. A section of the
code deals with fruits.
- Your code includes a variable named `fruit` that's used to hold the name of
different types of fruit.
- You have a list of the 20 fruits that your application is focused on.
- You want to branch your code based on the value assigned to `fruit`.

In this scenario, you can use a `switch` statement to create a separate branch
for each type of fruit.

### How does a switch statement work?

The `switch` statement chooses one section of code to execute from a list of
possible switch sections. The selected switch section is chosen based on a
pattern match with the statement's match expression.

Consider the following code sample that shows the basic structure of `switch`
statement:

```cs
switch (fruit) {
    case "apple":
        Console.WriteLine($"App will display information for apple.");
        break;
    case "banana":
        Console.WriteLine($"App will display information for banana.");
        break;
    case "cherry":
        Console.WriteLine($"App will display information for cherry.");
        break;
}
```

The match expression (which may also be referred to as the switch expression)
is the value following the `switch` keyword, in this case (`fruit`). Each
*switch* section is defined by a *case pattern*. Case patterns are constructed
using the keyword `case` followed by a value. The first case pattern in this
example is: `case "apple":`. Case patterns are Boolean expressions that
evaluate to either `true` or `false`. Each switch section includes a small
number of code lines that will be executed if the case pattern is a match for
the match expression. In this example, if `fruit` is assigned a value of
"apple", the first case pattern will evaluate as `true` and that switch section
will be executed.

A switch statement must include at least one switch section, but will normally
contain three or more switch sections.

The switch is best used when:

- You have a single value (variable or expression) that you want to match
against many possible values.
- For any given match, you need to execute a couple of lines of code at most.

> Note  
> This first example of a `switch` statement is purposefully simple and your
examination of the syntax was brief. You will be examining additional features
of the `switch` statement when you work through some more advanced scenarios
in the sections below.

It's time to prepare your coding environment and begin developing your own
`switch` statements.

#### Prepare your coding environment

At the Terminal command prompt, to create a new console application in a
specified folder, type dotnet new console -o ./path_to/TestProject and then
press Enter.

This .NET CLI command uses a .NET program template to create a new C# console
application project in the specified folder location.

#### Create and test a switch statement

Type the following code into the editor:

```cs
int employeeLevel = 200;
string employeeName = "John Smith";

string title = "";

switch (employeeLevel) {
    case 100:
        title = "Junior Associate";
        break;
    case 200:
        title = "Senior Associate";
        break;
    case 300:
        title = "Manager";
        break;
    case 400:
        title = "Senior Manager";
        break;
    default:
        title = "Associate";
        break;
}

Console.WriteLine($"{employeeName}, {title}");
```

The Program.cs file must be saved before building or running the code.

At the Terminal command prompt, to run your code, type `dotnet run` and then
press Enter.

Output

```txt
John Smith, Senior Associate
```

Take a minute to review the `switch` statement that you entered.

Notice that the `switch` statement defines a single code block.

The `switch` statement defines a single code block that includes a list of
`switch` sections. To the right of the switch keyword is a *switch expression*
that's enclosed in parentheses.

Notice the list of switch sections inside the code block.

The `switch` code block contains a list of switch sections, each of which
includes one or more switch labels. In addition, each switch section includes
a statement list that will execute if the label is equal to the switch
expression defined at the top of the switch statement.

The switch expression is evaluated against the case labels from top to bottom
until a value that is equal to the switch expression is found. If none of the
labels are a match, the statement list for the `default` case will be executed.
If no default is included, control is transferred to the end point of the
switch statement. Each label must provide a value type that matches the type
specified in the switch expression.

> Note  
> The optional `default` label can appear at any position within the list of
switch sections. However, most developers choose to put it last because it
makes more sense (logically) to position `default` as the final option.
Regardless of the position, the `default` section will be evaluated last.

In our example:

- the switch expression is `(employeeLevel)`
- each switch section has a single switch label (`case` or `default`).
- the matching switch section is defined by `case: 200`, since
`employeeLevel = 200`.

Notice that each switch section is separated from the next.

Only one switch section is allowed to be executed. This means that execution
of a switch section is not permitted to “fall through” to the next switch
section. The `break` keyword is one of several ways to end a switch section
before it gets to the next section. If you forget the `break` keyword (or,
optionally, the `return` keyword) the compiler will generate an error.

#### Change the level variable value to see how the switch statement evaluates it

To exercise the default case, let's change the employee's level by modifying the value assignment.

To modify the value assigned to `employeeLevel`, update your code as follows:

```cs
int employeeLevel = 201;
```

Save your code file, and then run your code.

Enter `dotnet run` from the Terminal command prompt to run your code.

Notice that the output has changed.

Now, when you run the code, you should see the more generic title used.

```txt
John Smith, Associate
```

Since the `employeeLevel` doesn't match any labels, the `default` label is
matched.

#### Modify a switch section to include multiple labels

Suppose our company decided to give all level 100 employees the title "Senior
Associate" -- the same title as level 200 employees. As the developer, you
decide to implement this by removing the first switch section belonging to the
label `case 100:`, and instead allow both the `case 100:` and `case 200:` labels
to execute the same switch section.

To modify the value assigned to employeeLevel, update your code as follows:

```cs
int employeeLevel = 100;
```

To assign multiple labels to the first switch section, update your code as follows:

```cs
case 100:
case 200:
    title = "Senior Associate";
    break;
```

When you're finished making changes, your modifications should match the
following code:

```cs
int employeeLevel = 100;
string employeeName = "John Smith";

string title = "";

switch (employeeLevel) {
    case 100:
    case 200:
        title = "Senior Associate";
        break;
    case 300:
        title = "Manager";
        break;
    case 400:
        title = "Senior Manager";
        break;
    default:
        title = "Associate";
        break;
}

Console.WriteLine($"{employeeName}, {title}");
```

Save your code file, and then run your code.

Enter `dotnet run` from the Terminal command prompt to run your code.

You should see the following output:

```txt
John Smith, Senior Associate
```

Both of the case labels `100` and `200` are now paired with the switch section
that sets the title to the string value `Senior Associate`.

### Recap

Here's the main takeaways you learned about the switch statement:

- Use the `switch` statement when you have one value with many possible matche
s, each match requiring a branch in your code logic.
- A single switch section containing code logic can be matched using one or
more labels defined by the `case` keyword.
- Use the optional `default` keyword to create a label and a switch section
that will be used when no other case labels match.

---

## Exercise

### Complete a challenge activity using switch statements

Code challenges will reinforce what you've learned, and help you gain some
confidence before continuing on.

### Convert to switch statements challenge

In this challenge, you'll rewrite an `if-elseif-else` construct as a `switch`
statement. This challenge should help you see the strengths/weaknesses of the
`switch` statement when compared to an `if-elseif-else` construct. Good luck.

### Code challenge: rewrite if-elseif-else using a switch statement

You'll start with code that uses an `if-elseif-else` construct to evaluate the
components of a product SKU. The SKU (Stock Keeping Unit) is formatted using
three coded values: `<product #>-<2-letter color code>-<size code>`. For
example, a SKU value of `01-MN-L` corresponds to (sweat shirt)-(maroon)-(large),
and the code outputs a description that appears as "Product: Large Maroon
Sweat shirt".

Your challenge is to convert the `if` statement code to a `switch` statement
that achieves the same result as the initial code.

Enter the following code into the code editor:

```cs
// SKU = Stock Keeping Unit. 
// SKU value format: <product #>-<2-letter color code>-<size code>
string sku = "01-MN-L";

string[] product = sku.Split('-');

string type = "";
string color = "";
string size = "";

if (product[0] == "01") {
    type = "Sweat shirt";
} else if (product[0] == "02") {
    type = "T-Shirt";
} else if (product[0] == "03") {
    type = "Sweat pants";
} else {
    type = "Other";
}

if (product[1] == "BL") {
    color = "Black";
} else if (product[1] == "MN") {
    color = "Maroon";
} else {
    color = "White";
}

if (product[2] == "S") {
    size = "Small";
} else if (product[2] == "M") {
    size = "Medium";
} else if (product[2] == "L") {
    size = "Large";
} else {
    size = "One Size Fits All";
}

Console.WriteLine($"Product: {size} {color} {type}");
```

Update the code to use a `switch` statement in place of the `if-elseif-else`
construct.

Verify that your output hasn't changed.

No matter how you do it, your code should produce the following output:

Output

```txt
Product: Large Maroon Sweat shirt
```

```cs
string sku = "01-MN-L";

string[] product = sku.Split('-');

string type = "";
string color = "";
string size = "";

switch (product[0]) {
    case "01":
        type = "Sweat shirt";
        break;
    case "02":
        type = "T-Shirt";
        break;
    case "03":
        type = "Sweat pants";
        break;
    default:
        type = "Other";
        break;
}

switch (product[1]) {
    case "BL":
        color = "Black";
        break;
    case "MN":
        color = "Maroon";
        break;
    default:
        color = "White";
        break;
}

switch (product[2]) {
    case "S":
        size = "Small";
        break;
    case "M":
        size = "Medium";
        break;
    case "L":
        size = "Large";
        break;
    default:
        size = "One Size Fits All";
        break;
}

Console.WriteLine($"Product: {size} {color} {type}");
```